Contact Us
  No.2670 & 2672 (Ground Floor),
Persiaran Tengku Ampuan Rahimah,
41200 Klang, Selangor, Malaysia.
   
  TEL: +603 - 3371 9120
           +603 - 3372 8825
  FAX: +603 - 3371 6981
  H/P: +6012 - 318 0416 Tan Lian Kooi
         +6012 - 312 6199 C.K.Tan
  Email: safeworld.com@gmail.com
 
 

FISH PROCESSING MACHINERY

 

FULLY AUTOMATIC UP-DOWN DEEP FRYER

Model SW-MPFF 800 A -DB
Basket: Stainless Steel Perforated Sheet (58” Dia x 12” Depth)
Capacity:60“ Dia x 18” Depth (837.15 Litres)
Energy:B 40 Bentone Diesel Burner
1 No. 3HP 415V Motor C/W Speed Reducer
1 No. 2Hp 415V Motor C/W Speed Reducer
Material:
  • 1 Set Stainless Steel Stirer (adjustable)(Twin Timer Control)
    1 No. Temperature Controller(Japan)
    4” Fire Brick Insulation C/W 1.2mm Thick Stainless Steel Plate
    1 No. Control Panel (3 Timer Control)
    2“ Stainless Steel Outlet
    Stainless Steel Chimney
    5mm Stainless Steel Curve Dish For Buttom
Origin:Malaysia
 

FISHBALL MOULDER
Model FBM 300VI
Usage: a) To mould fishballs of various sizes, between 16mm to 25mm
b) To mould fish sausage of various lengths, not exceeding 6 inches
Capacity: 100-300 pieces per min
Energy: A.C Motor, 1HP & 0.5HP, 230V, 50HZ,
C/W Digital Speed Regulator
Material:
  • a) Body & Frame : Stainless Steel, AISI 304
    b) The Rest : Mild Steel, Cast Iron etc.
Weight: 160kilogram (approx.)
Dimension:
  • 80cm x 55cm x 150cm (L x W x H)
    31.5” x 21.65” x 59” (L x W x H)
Origin: Malaysia
 

FISHBALL MOULDER
Model FBM 200V
Capacity: 100-200 pieces per min
Energy: A.C Motor, 1HP, 230V, 50HZ,
C/W Mechanical Speed Regulator
Mould:
  • a) Size:16mm (Diameter)
  • 20mm(Diameter)
  • 25mm(Diameter)
  • b)Material: Brass
Material:
  • a) Body & Frame : Stainless Steel, AISI 304
    b) The Rest : Mild Steel, Cast Iron etc.
Weight: 160 kilogram (approx.)
Dimension: 80cm x 55cm x 150cm (L x W x H)
31.5” x 21.65” x 59” (L x W x H)
Origin: Malaysia
 

FISHBALL MOULDER
Model FBM 200L
Capacity: 100-200 pieces per min
Energy: A.C Motor, 1HP, 230V, 50HZ,
C/W Speed Regulator (Gear Box)
Material:
  • a) Body & Frame : Stainless Steel, AISI 304
    b) The Rest : Mild Steel, Cast Iron etc.
Weight: 160 kilogram (approx.)
Dimension: 80cm x 55cm x 150cm (L x W x H)
31.5” x 21.65” x 59” (L x W x H)
Origin: Malaysia
 

FISHBALL WASHER
Model FW 25
Capacity: a)25kgs Per Tank
b) 100 Kg Per hour
Energy: A.C Motor, 2HP, 230V, 50HZ,
Material:
  • Stainless Steel, AISI 304
Weight: 100 kilograms (approx.)
Dimension: 99cm x 51cm x 84cm (L x W x H)
39” x 20” x 33” (L x W x H)
Origin: Malaysia
 

FISH SAUSAGE STUFFER
Model FSS 320 A
Usage: To stuff and extrude fish dough through a funnel to form fish sausage, etc.
Capacity: 200 kilograms per hour (approx.)
Energy: a) Requirement: A.C, 415V, 50HZ
b) Power: Electric Motor, 5HP, 1500RPM C/W Starter
Material: a) Body & Frame : Stainless Steel, AISI 304
b) Hopper & Auger : Stainless Steel, AISI 304
c) Funnel & Lock : Stainless Steel, AISI 304
Weight: 150 kilograms (approx.)
Dimension: 66cm x 46cm x 143cm (L x W x H)
26" x 18" x 56" (L x W x H)
Funnel 0.75", 1" (D)
Origin: Malaysia
 

FISH SAUSAGE EXTRUDER
Model FSE 34
Usage: To extrude and form fish sausage of various diameter by stuffing the fish dough into a cellulose casing.
Capacity: a)Volume: 34 litres per batch
b)Tank: 15” x 12“ (D x H)
c)Production: 150 kilograms per hour (approx.)
Energy: a) A.C Motor, 2HP, 230V, 50HZ, C/W Hydraulic System
b) Pressure : 1000-2000 P.S.I (adjustable)
Material: a) Extruding Tank: Stainless Steel
b) Body & Frame: Stainless Steel
Weight: 200 kilograms (approx.)
Dimension: 91cm x 61cm x 168cm (L x W x H)
36” x 24” x 66” (L x W x H)
Origin: Malaysia
 

FISH PELLETIZER
Model SW-FP 100 A
Usage: To pelletize fish dough into fish pellets of various diameters between 3mm to 5mm
Capacity: 25-50 kilograms per hour
Energy: A.C Motor, 2HP, 240V, 50HZ, C/W Starter & Cable
Material: a) Pelletizing Head: Stainless Steel, AISI 304
b) Body & Frame: Stainless Steel, AISI 304
Weight: 80 kilograms (approx.)
Dimension: 66cm x 46cm x 142cm (L x W x H)
26” x 18” x 56” (L x W x H)
Origin: Malaysia
 

FISH PATTY MOULDER
Model FPM 250 IC
Usage: To form flat fish patties, e.g. fish cakes, fish burgers, fish fingers, fish nuggets, etc.
Capacity: Between 1000-2000 pieces per hour (adjustable)
Patty Size: a) Standard : Diameter :60mm
b) Optional: Between 40mm-100mm
c) Thickness: Between 10mm - 20mm (adjustable)
Energy:
  • a) Requirement : Single Phase, 230V, 50HZ
  • b) Motor C/W Frequency Inverter: i) Mould: 0.5HP
  • ii)Auger:0.24HP
  • iii) Conveyor: 60 watts
Material:
  • a) Body & Frame: Stainless Steel, AISI 304
    b) Hopper, Auger & Wiper : Stainless Steel, AISI 304
Weight: 100 kilograms (approx.)
Dimension:
  • a) Internal : 60cm x 84cm x 178cm (L x W x H)
  • 23.62” x 33.07“ x 70.08” (L x W x H)
  • a) External : 87cm x 89cm x 198cm (L x W x H)
  • 34.25” x 35.04“ x 77.95” (L x W x H)
Mobility: 4 x 3.5” (D) P. U. Wheels
Origin: Malaysia
 

FISH PATTY MOULDER
Model SW - FPM 250 C
Usage: To form flat fish patties, e.g. fish cakes, fish burgers, fish fingers, fish nuggets, etc.
Capacity: Between 0-3000 pieces per hour (adjustable)
Patty Size: a) Round : Diameter :100mm(Max)
b) Rectangle: 125mm x 25mm (L x W)
c) Thickness: Between 10mm - 20mm (adjustable)
Mould: a) Dimension: 10” x 8“ (D x L)
b) Material: Teflon
Energy: A.C, 1HP & 0.24HP, 230V, 50HZ, C/W 2 Digital Speed Regulators
Material:
  • a) Body & Frame: Stainless Steel, AISI 304
    b) Hopper, Auger & Wiper : Stainless Steel, AISI 304
Weight: 100 kilograms (approx.)
Dimension: 91.44cm x 66.04cm x 152.40cm (L x W x H)
36” x 26” x 60” (L x W x H)
Mobility: 4 x 4” Stainless Steel Wheels C/W Lock
Origin: Malaysia
 

FISH PATTY MOULDER C/W BREAD CRUMB COATER
Model FPM 75 x 2 I/BCC
Usage: To form flat fish patties and to coat them with bread crumb simultaneously and manually.
Capacity: Between 2000-400 pieces per hour
Fish Patty Size: 75mm Diameter (Max)
Fish Patty Thickness: 4mm-12mm (Adjustible.)
Energy: A.C, 0.5HP x 2Units, 230V, 50HZ
Material: a) Feeding Tank : Stainless Steel
b) Coating Pan: Stainless Stell
c) Body & Frame: Stainless Steel
Weight: 200 kilograms (approx.)
Dimension: a) Fish Patty Moulder: 44” x 38“ x 60” (L x W x H)
b) Bread Crumb Coater: 42” x 33” (D x H)
Origin: Malaysia
 

FISH PASTE PESTLE GRINDER
Model EJ 250
Usage: To grind and to mix fish meat with flour, etc for fish value- added food processing.
Capacity: 250 kilograms per mortar
Mortal: 850mm (Diameter)
Energy: A.C, 415V, 50HZ
5.5HP, Variable Speed Motor
Material: a)Mortar: Granite
b)Ice Water Jacket: Stainless Steel
c)Body & Frame: Painted Cast Iron
Origin: Taiwan, R.O.C.
 

FISH MEAT MINCER
Model FMM 400 SSF
Capacity: 400 kilograms per mortar
Energy: A.C Motor, 5.5HP, 415V, 50HZ
Material:
  • a) Mincer : Tin -Plated Cast Iron
    b) Body & Frame : Stainless Steel, AISI 304
Weight: 200 kilograms (approx.)
Dimension: 75cm x 70cm x 165cm (L x W x H)
29.5” x 27.5” x 65” (L x W x H)
Origin: Malaysia
 

FISH MEAT MINCER
Model FMM 400A
Capacity: 400 kilograms per hour
Energy: A.C Motor, 5.5HP, 415V, 50HZ
Material:
  • a) Mincer : Tin -Plated Cast Iron
    b) Body & Frame : Stainless Steel, AISI 304
Weight: 200 kilograms (approx.)
Dimension: 75cm x 70cm x 165cm (L x W x H)
29.5” x 27.5” x 65” (L x W x H)
Origin: Malaysia
 

FISH MEAT MINCER
Model FMM 320 A
Usage: To mince and reduce the size of fish meat for further fish processing.
Capacity: 50-100 kilograms per hour
Energy: a) Requirement : A.C, 5.5HP, 415V, 50HZ
b) Power : Electric Motor, 5HP, 1500RPM C/W Starter
Material:
  • a) Body & Frame : Stainless Steel, AISI 304
    b) Hopper, Auger & Grinding Chamber: Stainless Steel, AISI 304
Weight: 150 kilograms (approx.)
Dimension:
  • 79cm x 42cm x 153cm (L x W x H)
    31” x 16.5” x 60” (L x W x H)
Origin: Malaysia
 

FISH MEAT MINCER
Model FMM 100 A
Capacity: 100 kilograms per hour
Energy: A.C Motor, 1.5HP, 230V, 50HZ
Material:
  • a) Hopper & Body Cover: Stainless Steel
    b) Frame: Mild Steel
Weight: 150 kilograms (approx.)
Dimension: 30” x 20” x 50” (L x W x H)
Origin: Malaysia
 

FISH MEAT MINCER
Model FMM 100
Capacity: 100 kilograms per hour
Energy: A.C Motor, 1HP, 230V, 50HZ
Material:
  • a) Hopper & Body Cover: Stainless Steel, AISI 304
    b) Frame: Stainless Steel, AISI 304
Weight: 60 kilograms (approx.)
Dimension: 28” x 16” x 45” (L x W x H)
Origin: Malaysia
 

FISH MEAT LEACHER
Model FML 200
Capacity: 200 kgs Per Batch
Energy: A.C, 5.5HP, 415V, 50HZ
Material:
  • a) Leaching Tank : Stainless Steel
    b) Body & Frame: Stainless Steel
    c) Motor, Gear Box, etc : Universal Standard
Weight: 500 kilograms (approx.)
Dimension: a) Tank: 72” x 36” x 42” (L x W x H)
b) Overall: 108” x 40” x 64” (L x W x H)
Origin: Malaysia
 

FISH MEAT LEACHER
Model FML 50
Usage: To remove fats, blood stains, water soluble proteins, etc. from the deboned fish meat by repeated chilled leaching.
Capacity: a)Fish Meat : 50 kilograms per batch
b) Tank: 520 litres: 48” x 26“ x 30” (L x W x H)
Energy: A.C, 5.5HP, 415V, 50HZ, C/W Starter.
Material:
  • a) Tank: Stainless Steel, AISI 304
    b) Body & Frame: Stainless Steel, AISI 304
Weight: 200 kilograms (approx.)
Dimension: 201cm x 86.50cm x 150cm (L x W x H)
79” x 34” x 59” (L x W x H)
Origin: Malaysia
 

FISH MEAT DEHYDRATOR
Model FMD 15
Usage: To apply hydraulic force to remove excessive water from the leached fish meat.
Capacity: 15 kg per batch
Energy:

A.C Motor, 2HP, 230V, 50HZ
Material:
  • a) Body & Frame: Stainless Steel
    b) Basket: Stainless Steel
Weight: 200 kilograms (approx.)
Dimension: 91cm x 61cm x 168cm (L x W x H)
36” x 24” x 66” (L x W x H)
Origin: Malaysia
 

FISH MEAT DEHYDRATOR
Model CF 360
Capacity: 400 kgs per hour
Energy:

A.C Motor, 1HP, 415V, 50HZ
Material:
  • Stainless Steel, AISI 304
Weight:1000 kgs (Approx.)
Dimension: 175cm x 36cm (L x D)
69” x 14” (L x D)
Origin: Taiwan, R.O.C.
 

GAS BAKING OVEN
Model GO-SW1 X 60 -SS
Capacity: 1 Tier C/W 1 Grill
Baking Chamber: 44” x 36” x 9” = 8.25 cu.ft.
Energy:

L.P. Gas
Material:
  • a) Body : Stainless Steel
    b)Frame: Mild Steel
Dimension: 60” x 46” x 52” (L x W x H)
Origin: Malaysia
 

FISH MEAT CLEANSER
Model FMC 500
Capacity: 500 kgs per hour
Screen: 292cm x 38cm (L x D)
115” x 15” (L x D)
Hole: 0.4mm
Energy:

A.C, 2 x 1HP, 415V, 50HZ
Material: Stainless Steel, AISI 304
Dimension: 348cm x 122cm x 122cm (L x W x H)
137” x 48” x 48” (L x W x H)
Origin: Malaysia
 

FISH JELLY MIXER
Model FJM 50
Usage: To mix fish meat, flour, water, salt, etc.
vertically for fishball processing.
Capacity: 50 kilograms per bowl
Tank: 100 litres
Energy:

A.C Motor, 3HP, 415V, 50HZ, C/W Frequency Inverter
Material:
  • a) Tank & Agitator: Stainless Steel
    b) Body & Frame: Stainless Steel
Weight: 150 kgs (Approx.)
Dimension: 24” x 33” x 54” (L x W x H)
Origin: Malaysia
 

FISH DOUGH SLICER
Model FDS 76
Usage: To slice frozen fish dough or prawn dough, etc. into thin slices of between 1mm to 3mm by a slant - cutting guillotine.
Capacity:
  • a) Production: Between 50 - 100 kilograms per hour depending on the
  • thickness of each slice.
  • b) Guillotine Gate: 280mm x 76mm (W x H)
  • c) Dough Tray: 400mm x 280mm x 25mm (L x W x H)
Energy:

a) Requirement: A.C Motor, 230V, 50HZ
b) Power: 1HP Motor, 230V, 50HZ
Material:
  • a) Dough Tray: Stainless, AISI 304
    b) Body & Frame: Stainless Steel, AISI 304
Weight: 100 kgs (Approx.)
Dimension: 100cm x 72.40cm x 145cm (L x W x H)
39.37” x 28.5” x 57” (L x W x H)
Origin: Malaysia
 

FISH DOUGH MIXER
Model FDM 75
Usage: To mix fish meat, flour, water, etc. homogeneously for fish processing
Capacity: 75 kilogram per tank
Energy:

A.C Motor, 5.5HP, 415V, 50HZ
Material:
  • a) Tank: Stainless Steel
    b) Body & Frame: Stainless Steel
Weight: 150 kgs (Approx.)
Dimension: a) Tank: 36” x 20” x 22” (L x W x H)
b) Overall: 64” x 25” x 41” (L x W x H)
Origin: Malaysia
 

FISH DEBONER
Model FD 8
Usage: To separate fish meat from the rest of the body, e.g. bones, skin, scales, etc.
Capacity: 300 kilogram per hour (Raw Fish)
Energy:

A.C Motor, 5.5HP, 415V, 50HZ, C/W Starter
Material:
  • a) Deboning Cylinder : Stainless Steel, AISI 304
    b) Hopper: Stainless Steel, AISI 304
    c) Body & Frame: Painted Mild Steel & Cast Iron
Weight: 400 kgs (Approx.)
Dimension: 106cm x 80cm x 105cm (L x W x H)
41.7" x 31.5" x 41.3" (L x W x H)
Origin: Malaysia
 

FISH DEBONER
Model FD 6
Usage: To separate fish meat from the rest of the body, e.g. bones, skin, scales, etc.
Capacity: 100 kilogram per hour (Raw Material)
Energy:

A.C Motor, 1.5HP, 230V, 50HZ
Material:
  • a) Deboning Cylinder : Stainless Steel, AISI 304
    b) Hopper: Stainless Steel, AISI 304
    c) Body & Frame: Painted Mild Steel & Cast Iron
Weight: 300 kgs (Approx.)
Dimension: 81.5cm x 73cm x 99cm (L x W x H)
32" x 28.75" x 39" (L x W x H)
Origin: Malaysia
 

FISH DEBONER
Model CF 350
Capacity: 1500 kilogram per hour (Raw Fish)
Energy:

A.C Motor, 10HP, 415V, 50HZ
Material:
  • a) Deboning Cylinder : Stainless Steel, AISI 304
    b) Body & Frame: Painted Mild Steel & Cast Iron
Weight: 1100 kgs (Approx.)
Dimension: 120cm x 100cm x 140cm (L x W x H)
47.25" x 39.37" x 55.12" (L x W x H)
Origin: Taiwan, R.O.C.
 

FISH CAKE MOULDER
Model CF 21
Capacity: 20-60 pieces per min (adjustable manually)
Fish cake size: a) Dimension : 3.5” x 2.6“ (L x W)
b) Thickness: Between 5mm - 10mm (adjustable)
Hopper: 35 litres (20 kilograms, approx.)
Energy:

Electric Gear Motor, 1HP, 415V, 50HZ
Material:
  • a) Hopper & Base Plate: Stainless Steel, AISI 304
    b) Body & Mould: Aluminium Alloy
Weight: 105 kgs (approx.)
Dimension: a) Overall: 115cm x 40cm x 60cm (L x W x H)
b) Base Plate: 64.5cm x 34.5cm (L x W)
Origin: Taiwan, R.O.C.
 

FISH BAR SLICER
Model FBS 19 x 11
Usage: To cut raw fish bars into fish sticks.
Capacity: a) Wide: 19mm
b) 11 pieces per batch
c) 1980 - 3300 pieces per hour
Energy:

A.C, 2HP, 230V, 50HZ c/w Speed Regulator
Material:
  • a) Body & Frame: Stainless Steel
    b) Blade: Stainless Steel
Weight: 80 kgs (approx.)
Dimension: 47cm x 47cm x 77cm (L x W x H)
18.5" x 18.5" x 30.5" (L x W x H)
Origin: Malaysia
 

CONTINUOUS FISH WASHER
Model SWE- CFW 1500
Usage: To remove scales from fishes, e.g. threadfin bream big - eye snapper, croaker, etc, continuously for further semi - surimi processing.
Capacity: 1500 kgs per hour
Energy:

A.C. Motor, 2HP, 415V, 50HZ

Material:
  • Stainless Steel, AISI 304
Weight: 800 kgs (approx.)
Dimension: 310cm x 109cm x 109cm (L x W x H)
122" x 43" x 43" (L x W x H)
Origin: Malaysia
 

CF FISH MEAT REFINER
Model CF 220
Usage: To refine fish meat after leaching during the surimi processing.
Capacity: 800 kgs per hour
Energy:

a) Requirement: A.C. Motor, 415V, 50HZ
b) Power: 7.5HP, 415V, 50HZ
Material:
  • a) Refining Screen: Stainless Steel, AISI 304
    b) Base Plate: Painted Mild Steel
Weight: 400 kilograms (approx.)
Dimension: 245cm x 54cm x 69cm (L x W x H)
96.46" x 21.26" x 27.17" (L x W x H)
Origin: Malaysia
 
 
Copyright 2011 @ safeworld.com.my. All rights reserved.